Mini Muffin Pan
Menu

Mini Muffin Pan Size Comparison: 12-Cup vs 24-Cup and Cavity Dimensions

A mini muffin cavity is typically about 1.9–2 in (48–51 mm) across the top and 0.75–1 in (19–25 mm) deep, holding roughly 2 tablespoons (about 1 fl oz / 30 ml) filled to the brim. A 24-cup pan is usually near 13.75 x 10.5 in overall; a 12-cup pan is roughly half that. A standard muffin cavity holds about 3–4 times as much.

By Mini Muffin Pan Editorial Team·Published ·Documentation-based assessment

Cavity dimensions

Typical cavity dimensions by pan type (commonly published ranges)
Pan typeTop diameterDepthCapacity to brimTypical batter fill
Mini muffin~1.9–2.0 in (48–51 mm)~0.75–1 in (19–25 mm)~2 tbsp (~30 ml)~1–1.5 tbsp
Standard muffin~2.75 in (70 mm)~1.5 in (38 mm)~1/2 cup (~120 ml)~1/4–1/3 cup
Jumbo / Texas muffin~3.25–3.5 in (83–89 mm)~1.75 in (44 mm)~3/4–1 cup (~180–240 ml)~1/2–2/3 cup

The practical takeaway: one standard muffin is roughly three to four mini muffins by volume. For converting recipes, see how many mini muffins equal one regular muffin.

Overall pan footprint

Approximate overall dimensions (verify per product)
PanOverall size (approx.)Fits a 30-in oven?Fits most toaster ovens?
12-cup mini~9.75 x 7.5 inYesSome — measure
24-cup mini~13.75 x 10.5 inYesRarely
6-cup mini (toaster-oven size)~8 x 6 inYesUsually

Which size to buy

  • 24-cup: one pan bakes a standard mini-muffin batch (a typical recipe yields ~24–48 minis). Best if you have a full-size oven and cabinet space.
  • Two 12-cup pans: the same total capacity with more flexibility — bake one now, one later, or use a single pan for a half batch.
  • 6-cup: for toaster ovens and very small batches. Check the interior dimensions of your oven, including rack clearance.

Rack clearance, not just floor space

A pan that fits the oven floor may not slide onto the rack with the door closed, and a filled mini muffin pan needs a little headroom for rise plus air circulation. Leave at least an inch around the pan on all sides for even heat.

Frequently asked questions

What size is a mini muffin pan cavity?
Most are about 1.9–2 inches (48–51 mm) across the top and 0.75–1 inch (19–25 mm) deep, holding roughly 2 tablespoons filled level. Brands differ by a few millimetres.
How big is a 24-cup mini muffin pan?
Commonly around 13.75 x 10.5 inches overall. That fits a standard 30-inch oven but usually not a toaster oven. Confirm the exact size on the product listing.
How many mini muffins does a standard recipe make?
A recipe written for 12 standard muffins generally yields about 36–48 mini muffins, because a standard cavity holds three to four times the batter.

How this page was compiled

  1. Compiled from current manufacturer product listings for mini, standard and jumbo muffin pans and standard baking references for muffin-cavity volume (standard cavity ~1/2 cup; mini ~2 tbsp).general guidanceOverall and cavity dimensions vary by brand — confirm against the manufacturer listing for your pan.

About Mini Muffin Pan Editorial Team

Mini Muffin Pan Editorial Team researches and writes these guides for Mini Muffin Pan. Our assessments are based on manufacturer specifications, product documentation, and publicly available technical information rather than paid placement. Where a page includes first-hand testing, it says so explicitly and describes what was done.

Read our editorial policy, review methodology, and corrections policy. Spotted an error? Tell us.

As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure.