Mini Muffin Pan
Menu

Mini Muffin Pan Dimensions and Capacity

Across the pans we cover, a mini muffin cavity is commonly about 1.9–2.3 in across the top, tapering toward the base, and roughly 0.75–1 in deep — though individual products vary (the Nordic Ware Naturals petite pan, for example, has 2.3-inch cavities). Brim capacity is about 2 tbsp; you normally fill to two-thirds, or roughly 1 to 1.5 tbsp. A 24-cup pan is commonly near 13.75 x 10.5 in, with some pans closer to 16 x 10 in.

By Mini Muffin Pan Editorial Team·Published ·Documentation-based assessment

Cavity measurements

Typical mini muffin cavity

Top diameter
1.9–2.0 in (48–51 mm)
Base diameter
about 1.3–1.6 in (33–41 mm) — not verified
Depth
0.75–1.0 in (19–25 mm)
Volume to brim
about 2 tbsp / 1 fl oz / 30 ml
Recommended fill
two-thirds full — about 1 to 1.5 tbsp

Volume compared to other muffin sizes

Cavity volume by pan type
Pan typeVolume to brimRelative to mini
Mini muffin~2 tbsp (30 ml)1x
Standard muffin~1/2 cup (120 ml)~4x
Jumbo muffin~3/4–1 cup (180–240 ml)~6–8x

Because a standard cavity holds roughly four times the batter, a recipe written for 12 standard muffins fills about 36–48 mini cavities. See how many mini muffins equal one regular muffin.

Overall pan dimensions

Approximate overall pan footprint (verify per product)
PanLength x widthHeightWeight (approx.)
12-cup mini~9.75 x 7.5 in~0.75 in~0.6–0.9 lb
24-cup mini~13.75 x 10.5 in~0.9 in~1.1–1.6 lb
6-cup mini~8 x 6 in~0.75 in~0.3–0.5 lb

Why the numbers matter

  • Batter portioning: a #40 or #50 disher (scoop) matches typical mini-cavity fill closely — see cookie scoops.
  • Bake time: smaller volume sets faster; minis often bake in about half to two-thirds the time of standard muffins.
  • Oven fit: a 24-cup pan needs a full-size oven; measure before buying.

Frequently asked questions

How much batter goes in each mini muffin cup?
About 1 to 1.5 tablespoons — roughly two-thirds full. Overfilling makes the tops spread and stick together. See how much batter goes into a mini muffin cup.
What are the dimensions of a 24-cup mini muffin pan?
Commonly around 13.75 by 10.5 inches overall, with cavities about 2 inches across. Exact figures vary by brand — check the listing.
How many millilitres does a mini muffin cavity hold?
About 30 ml filled to the brim. Filled to the normal two-thirds level, roughly 18–22 ml of batter.

How this page was compiled

  1. Compiled from current manufacturer product listings for 6-, 12- and 24-cup mini muffin pans and standard baking references for cavity volume and scoop sizing.general guidanceDimensions and weights vary by brand and gauge. Every figure here is a commonly published range, not a spec for a specific pan — confirm against the manufacturer listing.

About Mini Muffin Pan Editorial Team

Mini Muffin Pan Editorial Team researches and writes these guides for Mini Muffin Pan. Our assessments are based on manufacturer specifications, product documentation, and publicly available technical information rather than paid placement. Where a page includes first-hand testing, it says so explicitly and describes what was done.

Read our editorial policy, review methodology, and corrections policy. Spotted an error? Tell us.

As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure.